Skip to content
Sports car wheel resting on a finished flake epoxy floor

Garage floors that stop looking like garage floors.

Seamless, chemical-resistant coatings in flake and metallic systems.

5.0 from 45+ Google reviews30+ years in Southwest Florida
(239) 494-88886 layersand the first one is the grind

Tell us about your project

Free estimate · No obligation · We reply within one business day

Step 1 of 3 · Project33%
What needs painting?

The part that decides everything

Diamond-grinding a garage floor, filling cracks, and broadcasting flake. The grind is the step cheap epoxy jobs skip, and it is why they peel.

  1. 01Diamond grinding opens the pores so the coating can key into the slab.
  2. 02Every crack chased out and filled before a drop of epoxy goes down.
  3. 03Skip this and the floor peels in sheets, usually where a hot tyre sat.

Six layers, in this order

A garage floor is not one coat of anything. Skip any of these and the failure shows up in a year or two, usually as coating lifting off in sheets where a hot tyre sat.

6 coats
  • The slab you already have

Layer 1 of 6

Grind

relative thickness

Diamond grinders open the pores in the slab. Sealed or power-troweled concrete has a closed surface and coating cannot key into it.

If a quote does not mention grinding the slab, the coating is going onto a closed surface. That is the single most common reason a garage floor peels, and it is worth asking about before you sign anything, with us or with anyone else.

SUV parked on a completed flake epoxy garage floor

What you end up with

The concrete gets ground, cracks get filled, and the coating goes down in layers. What was the least finished surface in the house ends up being one you would show someone.

  • Diamond grinding to open the concrete for adhesion
  • Crack, pit, and joint repair before coating
  • Flake, metallic, and solid-colour systems
  • UV-stable polyaspartic topcoat
  • Resistant to hot tyres, oil, and pool chemicals
  • Sweep and mop maintenance, nothing else

Ideal for: Garages, workshops, lanais, patios, basements, utility rooms

Floors we have coated

Flake and metallic systems in Naples-area garages, lanais, and workshops.

What a floor costs

Floor pricing runs on square footage and on the condition of the slab. Grinding is part of every job, because a coating over unground concrete is the one thing that guarantees a callback.

Priced after we see the slab

A garage that needs crack and joint repair and a garage that needs a grind and a coat are different jobs at different numbers. We measure, check the slab for moisture, and give you the figure in writing before anything starts.

We measure

Square footage, cove base, and how the bays are laid out.

We read the slab

Cracks, joints, old coatings, and moisture in the concrete.

You get it in writing

One figure, before anything is ground or coated.

3-year workmanship warranty

Cracking, peeling, or chipping caused by defective workmanship is repaired at no cost for three years from the date of the project.

Estimates are free

Free, on site, no obligation. Work is booked on a 50% deposit.

What the neighbours said

5.0 average across 45+ verified Google reviews

Read every review
Florian and his team do an outstanding painting work. Their professionalism, attention to detail, and quality of work are impressive from start to finish. The project gets completed on time, the work area always clean, and final result exceeds expectations. It's clear that Florian takes pride in delivering high-quality workmanship and excellent customer service. I will continue referring Florian and his team to my customers because I know they will always do a fantastic job. Highly recommended for anyone looking for reliable painters.

Mariano Solis Perez

Verified Google review · a month ago

These guys are the best, their prices are very competitive and they treat your home as their own. They do what they say and they say what they do I would highly recommend them for any job interior or exterior.
David Plumley · 2 months ago
Florian and his crew were a pleasure to work with. His estimate was reasonable and actually put in more time than was necessary to perfect the outcome. Very pleased and highly recommended.
Steve Natapow · 3 months ago

Epoxy floor questions

Something not covered here? Ask on the phone and get an answer in a minute rather than a form reply tomorrow.

(239) 494-8888Or send it in writing

Every pin is a finished job

Filter by service using the panel on the map, or look for your own street. We work across Naples, Bonita Springs, and Estero.

Open full screen

Ancient Modern Finishes · completed projects

The map stays locked until you click it, so the page keeps scrolling.

Garage cleared and taped out ready for grinding

Measure the garage and we will price it.

We check the slab for moisture and cracking on the visit, because both change the number and neither is visible in a photo.

  1. We measure the baysIncluding the cove at the walls and the apron, which are easy to forget and are not free.
  2. The slab gets testedFor moisture and for anything already coated. Florida slabs come back wet more often than people expect.
  3. A written figure, then a dateMost garages are ground, coated, and back in use inside a week.

Clear a corner before the visit so we can see bare concrete somewhere.